2021年6月24日 · I’m posting this in case others can benefit from this little journey I took last week while finishing up my second board. I found myself with a few minor sand throughs in my gloss coat. This board has a PU foam core laminated with PE resin. At a minimum I wanted to seal those sand through areas, but ideally I wanted to both seal them and make them disappear, so I did some reading on ...

2017年5月5日 · I used up the low -lustre sealer and like the results.Then I saw they make wet gloss / hi-gloss sealer and got curious and picked up a gallon. I did some searches and didn’t see anything. It looks and smells the same. I did a little test spot on sanded epoxy and looks good. anybody try this stuff ?? like or dislike it ?? cheers Tom

Normally I do 100, 150,220,320, 2 coats Behr, Maroon Scotch Brite, Grey Scotch Brite. I don’t have 180 but I could start with 150, unless you think it’s worthwhile to seek out some 180. Jamie May 10, 2017, 1:54pm

2019年2月11日 · Wiped on two very nice coats of Behr Low luster and the board is now dry. Getting ready to do the maroon and grey scothbrite pads and went to read a little about it… Basically wondered if by hand or machine. In reading, it occured to me everyone is referencing the Behr sealer on Epoxy boards… Anyone ever put the sealer on poly boards?

2018年4月19日 · Hi all, Ive been making a couple of boards out of balsa wood in Ecuador for the last two months. It was very time consuming. I only had a few tools and the wood I was able to get at first wasnt long enough to build the boards on a traditional way ( using the wood lenghtwise). Its been a very big challenge for me, being my number 3-4-5-and 6th board build ever. So it seems (I hope) im about to ...

2011年12月27日 · I've been digging around on this and have seen that people may have tried to make a home brewed water based speed finish. A lot of the discussions seem to be open ended. So I have an epoxy board that I just finished sanding the fill coat and I figured I would try some experiments. I have some GF high performance water based matte urethane that works well, but it is just not flat enough. I was ...

2014年6月19日 · Floor sealer is used in alot of industries (Rainsong Graphite Guitars for instance). Sealers like Behr are a good adaptation for surfboards. Gloss and polish is preferred in some cases, although more work. Glad to see so many of you have adopted the Scotchbrite pads. They are a carry over from automotive and they are useful otherwise.

2016年10月28日 · Hi there, I just finished an eps-epoxy short board. I accidentally sanded through my fill coat in a few spots and was wondering if a) this could be fixed with a little rattle can clear coat instead of filling and then sanding again, or b) didnt need a fix at all and could be ridden as is. Other than acouple burn throughs I am pretty happy with my sanding job so im not sure that I want to clear ...

2018年1月6日 · If you are worried, use the floor sealer alternatives. Read the threads on the various brands. I use Behr satin. Wipe it on with a cloth, do 3 coats then a light scuff for a dull finish. I was using the rattle can clears, but I never liked the way they spray.

2002年10月15日 · when glassing the edges how far over the edge should you glass. and how do > you make this look clean when you glass the other side. do you just > feather it out in a polish goat of resin? i just dont want to be able to > see the extra material. i really want it to look clean. any help would be > sweet>>> thanks Chad, I find if …